Super Fix – Artificial Carpet Grass / AstroTurf Adhesive (5Ltr)

Price mentioned is per 5Ltr Gallon for Super Fix – Artificial Carpet Grass / AstroTurf Adhesive

SUPER FIX is a high-quality MDI based polyurethane pre-polymer for use as rubber crumb binder.

SUPER FIX has a relatively low viscosity and its fast cure speed is ideal for play areas.

SUPER FIX has the following features:

• Excellent Adhesion and Bonding Strength
• Rapid Hardening, depending on Humidity
• Specially developed for Hot Climate
• Meets requirement of BS7188:1988
• Excellent Water Resistance
• Excellent Heat Resistance
• Easy to Apply

SUPER FIX has the following properties:
Colour: Green
Physical form: Liquid
Open Time: 15-25 Minutes
Coverage Range (subject to surface condition): 3 – 7 m2/Ltr or 15 – 35 m2/ 5Ltr
Application: Brush or Roller
Packaging: 5 Ltr Gallon
Usage: Residential & Commercial
Storage: Store under cover, protect from direct sunlight and high temperature.
Cleaning: Clean immediately after use with water or white spirit if the material has dried. Immediately remove any adhesive from the surface of the floor covering with a damp cloth.

Health & Safety: As with all chemicals, caution should always be exercised.

Recommended Applications : SUPER FIX has been formulated as a flexible moisture curing binder for in-situ recycled rubber crumb shock pad and EPDM play surface top coats.

Conforms To : Free of asbestos, lead and mercury compounds

Surface Preparation: The surface should be structurally sound, clean, dry, leveled and free from dust, curing compounds, grease and other loose debris. Keep container closed when not in use.

Application Procedure:

SUPER FIX and rubber granules must be mixed in the desired ratio (generally

15% -20%). Ensure that volumetric ratio of binder addition is considered as the bulk density of rubber will vary. Rubber granules should be dry in order to stop accelerated cure time and foaming of the binder.

For adequate mixing, a high torque rotary mixer should be used. Rubber & binder should be mixed for up to 5 -10 minutes ensuring all the rubber is coated.

The product can then be laid out on a prepared surface and compacted using a hand trowel or weighted roller. Ensure an even compaction of the rubber. A release agent should be used on all tools to avoid adhesion of the binder on the tool.

Note: MDI based polyurethanes are subject to color changes when exposed to ultra violet light. This will not affect the mechanical properties of the binder.

Consult Material Safety Data Sheet and container label for further information.
For professional use only. Keep out of reach of children.

Contact us to know more about our products

MODERN FLOORS® – U.K. Trademark Product