Super Bond SBR – Waterproof Admixture (5kg)

Super Bond SBR LATEX ADMIXTURE is a High Performance Styrene-Butadiene Copolymer for Waterproofing & Bonding Mortar & Concrete mixtures for Water-Tight Applications

SUPER BOND SBR is a high-quality, rubber-modified styrene-butadiene copolymer latex designed for use with cementitious systems.

When mixed with cement, mortar, screed, or concrete, it acts as a powerful bonding agent and waterproofing admixture, significantly improving:

• Adhesion
• Flexural strength
• Water resistance
• Durability
• Chemical resistance

SUPER BOND SBR enhances the performance of both new and existing cementitious substrates and provides long-term protection against water penetration and aggressive environments.

KEY FEATURES & BENEFITS

• ADMIXTURE for cement, mortar & concrete
• Excellent bonding to old and new concrete
• Extreme resistance to water and water vapour
• Good resistance to salt permeation
• Reduces shrinkage and cracking
• Improves flexibility and toughness
• Low water/cement ratio
• Compatibility with all cements
• High abrasion resistance
• First-class bonding to asphalt
• Resistant to diluted acids, sulphates & chlorides
• Non-toxic
• Can be used with potable water
• More economical than epoxy bonding systems

TYPICAL PERFORMANCE IMPROVEMENTS

When used in cement mortar mixes, SUPER BOND SBR:

• Increases tensile and flexural strength
• Improves compressive strength
• Enhances impact and shock resistance
• Improves durability in aggressive environments
• Reduces permeability of cementitious materials
• Improves adhesion to steel, concrete, asphalt, brick and blockwork

The thermal expansion coefficient is similar to concrete, minimizing stress build-up.

RECOMMENDED APPLICATIONS

Bonding Agent

• Bonding new concrete to old concrete
• Tile bedding and fixing slip bricks
• Concrete repair and patching
• Bridge decks and structural repairs

Waterproofing Admixture

• Water tanks and reservoirs
• Swimming pools
• Basements
• Tunnels and underpasses
• Sludge tanks and ducts
• Roof screeds and cement toppings

Protective Slurries & Coatings

• Potable water tanks
• Holding tanks
• Porous concrete and blockwork
• Long-term concrete protection

Coverage : 5kg per 50kg cement against a 3:1 sand to cement mixture

MIXING & APPLICATION

Surface Preparation

All surfaces must be clean, free from dust, grease, laitance, loose particles and contaminants.

Highly absorbent surfaces should be dampened prior to application.

CLEANING

Clean tools and equipment immediately with water after use.
Hardened material can only be removed mechanically.

HEALTH & SAFETY

Use protective gloves and eye protection.
Avoid skin and eye contact.
In case of contact, rinse immediately with clean water.
Seek medical advice if irritation persists.

Consult Material Safety Data Sheet and container label for further information.
For professional use only. Keep out of reach of children.

Contact us to know more about our products

MODERN FLOORS® – U.K. Trademark Product