SUPER BOND SBR LATEX ADMIXTURE

High-Performance Styrene-Butadiene Copolymer for Waterproofing & Bonding Mortar and Concrete Mixes for Water-Tight Applications

SUPER BOND SBR is a high-quality rubber-modified Styrene-Butadiene copolymer latex designed for use with cementitious systems.

When mixed with cement, mortar, screed, or concrete, it acts as a powerful bonding agent and waterproofing admixture, significantly improving:

✔ Adhesion
✔ Flexural strength
✔ Water resistance
✔ Durability
✔ Chemical resistance

SUPER BOND SBR enhances the performance of both new and existing cementitious substrates while providing long-term protection against water penetration and aggressive environmental conditions.

---

KEY FEATURES & BENEFITS

✔ Admixture for cement, mortar & concrete
✔ Excellent bonding to old and new concrete
✔ Extreme resistance to water and water vapour
✔ Good resistance to salt permeation
✔ Reduces shrinkage and cracking
✔ Improves flexibility and toughness
✔ Supports lower water/cement ratios
✔ Compatible with all cement types
✔ High abrasion resistance
✔ Excellent bonding to asphalt
✔ Resistant to diluted acids, sulphates & chlorides
✔ Non-toxic formulation
✔ Suitable for potable water applications
✔ More economical than epoxy bonding systems

---

TYPICAL PERFORMANCE IMPROVEMENTS

When used in cement mortar and concrete mixes, SUPER BOND SBR:

✔ Increases tensile and flexural strength
✔ Improves compressive strength
✔ Enhances impact and shock resistance
✔ Improves durability in aggressive environments
✔ Reduces permeability of cementitious materials
✔ Improves adhesion to steel, concrete, asphalt, brick, and blockwork

The thermal expansion coefficient is similar to concrete, helping minimize stress build-up.

---

RECOMMENDED APPLICATIONS

Bonding Agent

✔ Bonding new concrete to old concrete
✔ Tile bedding and slip brick fixing
✔ Concrete repair and patching
✔ Bridge decks and structural repairs

---

Waterproofing Admixture

✔ Water tanks and reservoirs
✔ Swimming pools
✔ Basements
✔ Tunnels and underpasses
✔ Sludge tanks and ducts
✔ Roof screeds and cement toppings

---

Protective Slurries & Coatings

✔ Potable water tanks
✔ Holding tanks
✔ Porous concrete and blockwork
✔ Long-term concrete protection

---

COVERAGE

Recommended Dosage:

Approximately:

✅ 1kg SUPER BOND SBR per 50kg bag of cement
using a standard 3:1 sand-to-cement mix ratio.

Coverage may vary depending on application method, thickness, and site conditions.

---

MIXING & APPLICATION

Surface Preparation

All surfaces must be:

✔ Clean
✔ Free from dust, grease, laitance, loose particles, and contaminants

Highly absorbent surfaces should be dampened prior to application.

---

Important Mixing Note

⚠ Always mix:

1️⃣ SUPER BOND SBR + Water first
2️⃣ THEN add cement

❌ Do not add SUPER BOND SBR directly into dry cement without dilution.

---

CLEANING

Clean tools and equipment immediately with water after use.

Hardened material can only be removed mechanically.

---

HEALTH & SAFETY

✔ Use protective gloves and eye protection
✔ Avoid prolonged skin and eye contact
✔ In case of contact, rinse immediately with clean water
✔ Seek medical advice if irritation persists

Consult the Material Safety Data Sheet (MSDS) and container label for additional information.

⚠ For professional use only.
⚠ Keep out of reach of children.

Contact us to know more about our products

MODERN FLOORS & WALLS ® – U.K. Trademark Product